BLGQD - T-64P TONER FOR COPIER BD-7610

  • MSDS: BLGQD
  • Manufacturer: TOSHIBA CORP
  • Product Name: T-64P TONER FOR COPIER BD-7610
  • National Stock Number: 6850-00N019429
Product Identification

Product ID:T-64P TONER FOR COPIER BD-7610
MSDS Date:12/14/1987
FSC:6850
NIIN:00N019429
MSDS Number: BLGQD

Responsible Party
TOSHIBA CORPORATION
70 YANAGI-CHO SAIWAI-KU
KAWASAKI-SHI
JA

Emergency Phone: 714-583-3000

Info Phone: 714-583-3000

Cage: GO343

Contractor
TOSHIBA CORPORATION,HINO WORKS
HINO CITY,TOKYO JA

Telephone: 03-457-3232

Cage: GO343

Ingredients

STYRENE ACRYLATE COPOLYMER

Fraction By Weight: 92%


POLYPROPYLENE

CAS: 9003-07-4

RTECS: UD1842000

Fraction By Weight: 92.0%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 5 - 10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


INORGANIC PIGMENT

Fraction By Weight: 5.0%


ORGANIC PIGMENT

Fraction By Weight: 2.0%


ADDITIVES

CAS: 24937-78-8

Fraction By Weight: 1.0%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMUM IRRITATION TO RESPIRATORY
TRACT MAY OCCUR AS WITH EXPOSURE TO ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR, CALL MD. EYE: IMMEDIATELY FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH WITH COPIOUS AMOUNTS
OF WATER. CALL MD . INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Extinguishing Media:CO2, DRY CHEMICAL, FOAM OR WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . THIS MATERIAL WILL BURN IN THE CASE OF FIRE.
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSIAL FIRE OR
EXPLOSION HAZARDS.

Accidental Release

Spill Release Procedures:SWEEP UP OR CLEAN WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS FOR
SAFETY REASON.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:INHALATION SHOULD BE AVOIDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, PRACTICALLY ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CO, CO2 & NOX.

Disposal

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER CONDITIONS WHICH MEET ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.